Plumbing: What Goes Into A Complete New House Installation?

If you are in the process of building a new home, congratulations! This can be an exciting time for you, and there is a lot that still has to be done before you can move in. You will need a lot of help to get everything in, and one of the most important moves you can make now, before things get too far, is to call in an experienced plumber to help you with the complete new house installation that you will need.

Laying the Groundwork

A complete new house installation of plumbing can be a tricky thing, and no matter how beautiful your dream home is, bad plumbing will sour the whole experience in no time. With the help of an experienced plumber, you can insure that what goes into your new home will be the best that money can buy, and be as reliable as you need it to be. The first job will be laying the groundwork for installation of all necessary products and pipes.

With the help of your plumbing consultant, work out a plan on paper, detailing every major and minor installation that will go into your new home. You can set it up, room by room, to help you keep track of everything that will be needed. For instance, the kitchen will have the dishwasher and the kitchen sink, while the bathroom will have the toilet and the bathroom sink. Be sure to include a layout of all connecting pipes, and do not forget outside faucet access, especially if you also have a septic tank in mind.

Remember the Inspector

All new construction must pass a county or state building inspection. To avoid pitfalls created by using plumbing not included in your area’s building code, be sure to double check every proposed installation against the local code authority’s guidelines. This is another aspect of plumbing installation where your plumber on retainer can be an invaluable resource.

Every area has its own local code requirements, as do state and national construction agencies. Your plumber can provide you with a list of applicable codes that your home falls under, and can walk you through them, step by step. This way, any potential problems can be spotted prior to installation, and you can alter your plumbing groundwork maps accordingly. No surprises for the inspector, and no headaches in the future for you.

Choose your Materials Wisely

Whenever someone works on building their own home, quality may be compromised in order to save on costs. Plumbing is one area where this should never happen. In order to get a fully functioning plumbing system the way you want, you have to spend a little more on quality materials, to make sure that it will not turn out to be a money pit later on.

No matter how well your home will be insulated, the area weather still needs to be taken into consideration when purchasing plumbing materials. Not all of your pipes will be under the protection of your home’s insulation, especially those that come into contact with the ground around your home. You will need to be certain that the materials you choose can stand up to the weather changes in your area, and that any pipes coming into the home from the exterior ground be protected against freezing and other environmental changes.

Installation and Testing

Once you have everything purchased, rely on your plumber and his crew to efficiently install everything for you. Unless you are a trained plumber yourself, it is best to let the professionals handle the actual installation, if possible. And, in the same spirit of avoiding ugly surprises, make certain that every inch of the installation gets thoroughly tested to make sure it works, without fault or leaks, before the building inspector arrives.

A complete new house installation of plumbing can be an exhilarating experience to participate in. By working hand in hand with a qualified professional plumber, you can easily eliminate all of the headaches and potential problems even the most experienced builder can face.